接插式连接器/1线针型连接器
型号型号 231-650/019-000
- 适于各类导线的通用型连接技术
- 可从竖直或水平两个方向对笼式弹簧接线单元进行操作，使预置导线和现场布线均更加轻松简单
- 适于“线到线”及“板到线”连接
- 可安装防插错定位销条
工业交换机/工业-eco-经济型交换机
型号型号 852-1411
The 852-1411 Switch is an industrial unmanaged ETHERNET switch with 5 Gigabit ETHERNET ports, four of which support Power over Ethernet (PoE+) at 30 W. These 4 PoE+ ports (IEEE 802.3at) can be used simultaneously to power PoE end devices (powered devices). The integrated voltage transformer enables operation with -24 VDC, which is the standard supply voltage in control cabinets.
Its slim design paired with a DIN-rail adapter simplifies installation in the control cabinet and provides high vibration and shock resistance. Additionally, automatic transmission rate detection (auto-negotiation) and automatic identification of the transmit and receive lines (Auto MDI-X) allow simple plug-and-play operation, helping save time and money during commissioning.
Its slim design paired with a DIN-rail adapter simplifies installation in the control cabinet and provides high vibration and shock resistance. Additionally, automatic transmission rate detection (auto-negotiation) and automatic identification of the transmit and receive lines (Auto MDI-X) allow simple plug-and-play operation, helping save time and money during commissioning.
Features:
- 5 ETHERNET ports 10/100/1000 Mbit/s Autonegotiation
- 4 PoE+ ports (IEEE 802.3at)
- Front-panel diagnostic LEDs
- Supports Auto-MDI/MDI-X functions
- Full/half-duplex transfer modes for each port
- Store-and-forward switching method
- Integrated address look-up table, supports up to 8000 absolute MAC addresses
- Overvoltage protection
- IEEE 802.3x flow control in full-duplex mode
- Prioritization of PROFINET ETHERNET data packets (EtherType=0x8892) per IEEE802.1p
- DIN-35 rail mounting
pcb接线端子及接插式连接器/pcb-接线端子
型号型号 256-504/332-000
- PCB接线端子，带有推压键，具有笼式弹簧接线单元
- 也可提供拥有Ex e防爆认证的产品类型
- 焊针间距无论公制或英制，均为同一型号，可通过压紧或拉伸端子排的方式配合焊孔
- 通过推压键进行接线操作，是现场布线的理想选择
- 无需额外工具
pcb接线端子及接插式连接器/pcb-接线端子
型号型号 250-512/000-012
- 紧凑型PCB端子排，带有推压键
- 单股导线及加有冷压接头的细多股导线均可轻松的直接插入
- 通过推压键连接细多股导线或进行拆线操作
- 导线进线孔与水平面成45°，让布线更加轻松
pcb接线端子及接插式连接器/pcb-接线端子
型号型号 233-508
- PCB端子排，带有推压键，具有笼式弹簧接线单元
- 每极两个焊针带来高度的机械稳定性
- 通过推压键进行接线操作，是现场布线的理想选择
- 无需额外工具
接插式连接器/1线针型连接器
型号型号 831-3206/135-000
- 适于连接各种类型导线
- 单股导线及加有冷压接头的细多股导线均可轻松的直接插入
- 可使用Ø 2 mm测试插头进行测试
- 符合UL 1059标准的600 V额定电压
- 100%防插错保护
- 可安装定位销挡块
接插式连接器/tht-针型插座
型号型号 2091-1428/005-000
- 多个孔型连接器可并排与一个针形插座相连接，且不减少针形插座极数，以进行功能的分隔
- 安装到针形插座上的防插错销可防止错误接插，且可在穿墙式连接中应用
- 孔型连接器完全嵌入到针型插座外壳内部，可抵御最大20 g的振动
接插式连接器/thr-针型插座，2排
型号型号 713-1411/105-000
- THR针型插座，适于SMT回流焊接过程
- 针型插座外壳内的框格设计可以有效保护焊针在未接通状态时不受损害，同时也可提供防触电保护
- 100%防插错保护
- 可安装防插错定位销条
