工业交换机 - 电气产品

工业交换机/工业管理型交换机

型号型号 852-1505

The configurable 852-1505 Industrial ETHERNET Switch features eight 10/100/1000BASE-T ports that all support Power over Ethernet (PoE+) at 30 W, and has four 1000BASE-SX/LX SFP ports (SFP modules are available as an option). All eight PoE+ ports can be operated simultaneously.

Packaged in a rugged housing, this switch offers both a redundant power supply and relay-based function monitoring. These functions, along with extensive ETHERNET switch options, make it ideal for a wide range of applications.

Features:

Web-based/SNMP management
Redundant DC power supply
Supply voltage range: 48 … 57 VDC
DIP switches to set alarm functions
Full compliance with IEEE802.3, 802.3u, 802.3z, 802.3x, 802.3ad, 802.3ab, 802.1d, 802.1q, 802.1p, 802.1w, 802.1x and 802.3at standards
Xpress Ring (redundant ring, switching time < 20 ms)
Non‐blocking, store‐and‐forward switching, rapid spanning tree protocol (RSTP)
Auto-negotiation at all 10/100/1000BASE-T ports
Auto-MDI/MDIX (crossover) at all 10/100/1000BASE-T ports
VLAN (802.1q) VID
IGMP snooping for multicast filtering
Port configuration, status, statistics
Port trunking
SNMP v1/v2 and RMON

工业交换机/工业交换机

型号型号 852-103/040-000

852‐103/040-000 是一个带八端口 10/100Base‐TX 和双端口 SFP 100Base‐FX 的工业 ETHERNET 交换机（SFP 模块可选）。

该交换机的外壳坚固，配置冗余电源，通过继电器实现功能监测。这些功能是其应用广泛。

特点:

冗余的DC供电电源
供电电压范围大：9–48V
DIP开关启用报警功能
完全符合IEEE802.3, 802.3u标准
无阻塞，存储转发切换
所有10/100Base-TX端口处自动协商
所有 10/100Base-TX 端口处自动 MDI/MDIX（翻转）

工业交换机/工业-eco-经济型交换机

型号型号 852-1411

The 852-1411 Switch is an industrial unmanaged ETHERNET switch with 5 Gigabit ETHERNET ports, four of which support Power over Ethernet (PoE+) at 30 W. These 4 PoE+ ports (IEEE 802.3at) can be used simultaneously to power PoE end devices (powered devices). The integrated voltage transformer enables operation with -24 VDC, which is the standard supply voltage in control cabinets.
Its slim design paired with a DIN-rail adapter simplifies installation in the control cabinet and provides high vibration and shock resistance. Additionally, automatic transmission rate detection (auto-negotiation) and automatic identification of the transmit and receive lines (Auto MDI-X) allow simple plug-and-play operation, helping save time and money during commissioning.

Features:

5 ETHERNET ports 10/100/1000 Mbit/s Autonegotiation
4 PoE+ ports (IEEE 802.3at)
Front-panel diagnostic LEDs
Supports Auto-MDI/MDI-X functions
Full/half-duplex transfer modes for each port
Store-and-forward switching method
Integrated address look-up table, supports up to 8000 absolute MAC addresses
Overvoltage protection
IEEE 802.3x flow control in full-duplex mode
Prioritization of PROFINET ETHERNET data packets (EtherType=0x8892) per IEEE802.1p
DIN-35 rail mounting

工业交换机/工业-eco-经济型交换机

型号型号 852-1417

The 852-1417 Switch is an industrial unmanaged ETHERNET switch with 5 Gigabit ETHERNET ports, four of which support Power over Ethernet (PoE+) at 30 W. These 4 PoE+ ports (IEEE 802.3at) can be used simultaneously to power PoE end devices (powered devices). In addition, the switches have two SFP slots (1000BASE modules). The integrated voltage transformer enables operation with -24 VDC, which is the standard supply voltage in control cabinets.
Its slim design paired with a DIN-rail adapter simplifies installation in the control cabinet and provides high vibration and shock resistance. Additionally, automatic transmission rate detection (auto-negotiation) and automatic identification of the transmit and receive lines (Auto MDI-X) allow simple plug-and-play operation, helping save time and money during commissioning.

Features:

5 ETHERNET ports 10/100/1000 Mbit/s Autonegotiation
4 PoE+ ports (IEEE 802.3at)
2 Gigabit/s SFP slots
Front-panel diagnostic LEDs
Supports Auto-MDI/MDI-X functions
Full/half-duplex transfer modes for each port
Store-and-forward switching method
Integrated address look-up table, supports up to 8000 absolute MAC addresses
Overvoltage protection
IEEE 802.3x flow control in full-duplex mode
Prioritization of PROFINET ETHERNET data packets (EtherType=0x8892) per IEEE802.1p
DIN-35 rail mounting

工业交换机/工业管理型交换机

型号型号 852-303

该工业交换机(852-303)是一个带有8端口10/100Base-TX和双端口SFP 100 Base-FX/1000Base-FX/SX(选配SFP模块)的可配置以太网交换机。.

该交换机外壳坚固，配置有冗余电源和带功能监测的继电器。这些功能连同丰富的以太网交换机类型，使应用范围更加广泛。

特点:

基于Web/SNMP的管理
冗余DC供电电源
较宽的供电电压范围：12 ... 60 VDC
DIP开关具有报警功能
完全符合IEEE802.3, 802.3u, 802.3z, 802.3x, 802.3ad, 802.3ab, 802.1d, 802.1q, 802.1p, 802.1w, 802.1x标准
Xpress Ring (环网冗余恢复时间 < 50 ms)
非阻塞，存储转发模式
所有10/100Base-TX端口均具有自适应(Auto-negotiation)功能
所有10/100Base-TX端口均具有Auto-MDI/MDIX(自动翻转)功能
VLAN (802.1q) VID
IGMP侦听(Snooping)抑制多播流量溢出
端口配置、状态和统计
端口汇聚技术(Port Trunking)
SNMP v1/v2和RMON

工业交换机/工业管理型交换机

型号型号 852-1305

该工业交换机(852-1305)是一个带有8端口10/100/1000Base-TX和4端口SFP 100Base-SX/LX(选配SFP模块)的可配置以太网交换机。

该交换机外壳坚固，配置有冗余电源和带功能监测的继电器。这些功能连同丰富的以太网交换机类型，使应用范围更加广泛。

特点:

基于Web/SNMP的管理
冗余DC供电电源
较宽的供电电压范围：12... 60 VDC
DIP开关具有报警功能
完全符合IEEE802.3, 802.3u, 802.3z, 802.3x, 802.3ad, 802.3ab, 802.1d, 802.1q, 802.1p, 802.1w, 802.1x标准
Xpress Ring (环网冗余恢复时间 < 50 ms)
非阻塞，存储转发模式
所有10/100/1000Base-T端口均具有自适应(Auto-negotiation)功能
所有10/100/1000Base-T端口均具有Auto-MDI/MDIX(自动翻转)功能
VLAN (802.1q) VID
IGMP侦听(Snooping)抑制多播流量溢出
端口配置、状态和统计
端口汇聚技术(Port Trunking)
SNMP v1/v2和RMON